Air blast heat adsorption dryer

Product introductionA. PLC controlThe controller is a PLC controller independently developed by our company,Make the equipment operate more stably,It has higher reliability and stronger anti-interfere

Product manual download Leave us a message

Product features
Product specification
Accessories

Product introduction

A. PLC control

The controller is a PLC controller independently developed by our company,

Make the equipment operate more stably,

It has higher reliability and stronger anti-interference ability.

B. Principle

Adsorption drying process:

The compressed air containing water flows through the adsorption tower with high-performance adsorbent,

The water in the compressed air is absorbed and dried by the adsorbent and flows to the gas terminal,

It is used by gas consuming points.

C. Advantages

1. Less regeneration gas: the air blown from the outside air by the high-pressure blower is used as regeneration gas, and only 1% of the compressed air of the dried product is used for cooling. The gas consumption is 1/15 of the heatless regeneration adsorption dryer and 1/6 of the micro heat regeneration dryer.

2. High pressure blower with high reliability, long service life and low noise is adopted.

3. High performance PLC is used as the control host with strong anti-interference ability to ensure the smooth operation of the equipment, and the operation status of the equipment can be monitored locally or remotely (communication interface can be provided for customers).

4. According to the adsorption characteristics of aluminum oxide and molecular sieve, the layering technology developed by our company makes the air preliminarily dry through aluminum oxide, reduces the water content in the air, and then deeply dries through molecular sieve to achieve the air quality with low dew point.

Operating conditions and technical indicators

Purge Air: ≤ 1-3%

Working pressure: 0.6~1.0Mpa

Inlet oil content: ≤ 0.1mg/m ³

Dew point: - 20 ℃~- 40 ℃

Working periods: 8 hours

Inlet temperature: 0 ℃~45 ℃

Power: 380V/50HZ

model	flow	Blower power	Heater power	Full load power	Net weight of equipment	Overall dimensions
model	flow	Blower power	Heater power	Full load power	Net weight of equipment	L	W	H
DM150GR	17	1.5	12	12	958	1655	1670	1980
DM200GR	23	2.2	14	14	1115	1760	1700	2010
DM250GR	27	3.4	16	16	1422	1800	1780	2150
DM300GR	33	3.4	19	19	1852	1865	1860	2120
DM400GR	45	7.5	32	32	2230	1980	1930	2165
DM500GR	55	7.5	35	35	2430	2080	1985	2200
DM650GR	65	7.5	40	40	2837	2150	2150	2320
DM800GR	80	7.5	45	45	3685	2245	2200	2380
DM1000GR	100	13	50	50	4233	2340	2320	3420
DM1200GR	120	15	58	58	4660	2385	2410	3525
DM1500GR	150	15	70	70	5602	2460	2520	3610
DM1800GR	180	15	80	80	5602	2460	2520	3610
DM2000GR	200	24	100	100	5602	2460	2520	3610
DM2500GR	250	24	120	120	5602	2460	2520	3610

Online consultation Online consulting

Buyers are still watchingBuyers are still watching

Activated carbon filter

Dust filter

Oil water separator

High efficiency oil remover